idle problem

Hi all ive just cleaned out my breather system put it all back inc inlet manifold injectors etc... but now my car idles at 1300rpm ive checked for airleaks and sensors but all looks ok if i rev it the car idles down to 900rpm but climbs up to 1300 again can anyone help me??

sounds like a vacuum leak in 1 of your hoses, recheck them and make sure theyre all tight, regards cavey

all hoses checked 

ive checked all hoses sprayed wd40 on the joints to see if the revs change and nothing still the same

I've recently had this problem. I gave the idle air control valve and the throttle body a good clean. I've done around 500 miles since with no re-occurance. Ant.

cleaned idle valve control 

i have cleaned the idle cintrol valve about 1000 miles ago ok ill double check for air leaks and ill also try another idle control valve incase mine has packed up

I had to clean my idle air control valve twice. The flap inside has to be very floppy. I cleaned it (the second time) with thin strips of rag and carb cleaner. I've used this fella before if you need any bits; Ant.

hi ive just cured a very similar problem it was the elbow on the vacum pipe which enters on the left of the manifold by the power steering pump

Hi, one other idea off the top of my head... I managed to accidentally catch the throttle cable when doing jobs like this, is it possible the cable's been stretched somehow? Cheers, Pete